Arducam HM0360 VGA SPI 카메라 모듈 -라즈베리 피코용
(Arducam HM0360 VGA SPI Camera Module
for Raspberry Pi Pico)
개요
- 본 제품은 Arducam HM0360 VGA SPI 카메라 모듈 -라즈베리 피코용입니다.
- 초저전력의 VGA 해상도를 가진 카메라 모듈로 1 비트 비디오 데이터 시리얼 인터페이스와 라인 싱크를 지원합니다.
- 머신 비전 프로젝트에 적합한 제품으로 라즈베리 파이 피코보드나 다른 RP2040 보드와 사용가능하게 특별히 디자인된 제품입니다.
특징
- Ultra-Low Power, high sensitivity, low noise VGA sensor.
- Operates 7.8mA VGA 60 FPS down to 240µA in monitor mode.
- Automatic wake and sleep operation with programmable event interrupt to wake host processor.
- On-chip high precision oscillator, auto exposure/gain, ambient light sensor, and zone detection.
- Metered exposure provides well-exposed first frame and after extended sleep (blanking) period.
- External frame synch and stereo camera support.
- Flexible binning, subsampling, and region of interest.
- The embedded line provides metadata frame, AE statistics, zone trigger, and other interrupt event information.
- On-chip high precision oscillator and LDO.
- 1-lane MIPI CSI2 and 8-bit parallel/serial data format that supports 1-bit, 4-bit, and 8-bit protocol.
- I2C 2-wire serial interface supporting burst operation for fast register access.
- < 13 mm2 CSP sensor package option.
- High CRA for low profile module design.
-
Arducam HM0360 is a low-cost camera module built specifically for Raspberry Pi Pico and all available RP2040 dev boards.
The HM0360 uses Himax Imaging's advanced 3.6µ deep diode pixel and proprietary readout design to achieve superior low light performance while consuming only 140µA in QVGA 2FPS and approximately 7mA in VGA 60 frames per second read out mode.
To reduce camera system latency and power consumption, the HM0360 features an on-chip self-oscillator, real-time clock, fast initialization, <2ms frame trigger, context switching, and instant frame update. The sensor provides several monitoring options with programmable interrupt thereby allowing the host processor to be placed in low power standby until notified by the sensor.
- Based on Himax HM0360-MWA.
- 640x480, Monochrome, up to VGA @ 60FPS max.
- Designed for Always-on Service Applications.
- Configurable 1-bit video data serial interface with video frame and line sync.
- Ultra-low power consumption, standby < 140uW, VGA < 19.6mW.
- Motion detection wakeup interrupts output.
