AD9837 웨이브폼 신호 생성 모듈
(WAVEFORM 3 CLICK)
개요
- 본 제품은 AD9837 웨이브폼 신호 생성 모듈입니다.
- 프로그래밍 가능한 웨이브폼 생성 칩 AD9837 을 탑재하고 있는 제품입니다.
- 3선 SPI를 통해 통신이 가능합니다.
특징
-
Type Measurements Applications Can be used for waveform generation required in various sensing, actuation, and time domain reflectometry (TDR) applications. On-board modules AD9837 - low-power programmable waveform generator capable of producing sine, triangular, and square wave outputs from Analog Devices Key Features Low power consumption, high precission, digitally programmable frequency and phase, sinusoidal, triangular, and square wave outputs, power-down option, and more. Interface SPI Compatibility mikroBUS Click board size S (28.6 x 25.4 mm) Input Voltage 3.3V - Waveform 3 Click, as its foundation, uses the AD9837, a fully integrated direct digital synthesis (DDS) device capable of producing high-performance sine and triangular wave outputs from Analog Devices. It also has an internal comparator that allows the creation of a square wave for clock generation. With 28-bits wide frequency registers, the output frequency and phase are software programmable allowing easy tuning. The AD9837 is fully capable of a broad range of complex and straightforward modulation schemes fully implemented in the digital domain, allowing the accurate and precise realization of complex modulation algorithms using DSP techniques.
The internal circuitry of the AD9837 consists of a numerically controlled oscillator (NCO), frequency and phase modulators, SIN ROM, a DAC, a comparator, and a regulator. Also, it has a high-performance, onboard 16MHz trimmed general oscillator that can serve as the master clock for the AD9837 achieving a resolution of 0.06Hz.
The AD9837 offers a variety of outputs available from an onboard output SMA connector. The various output options (sine, triangular, and square wave) available from the AD9837 make this Click board™ suitable for a wide variety of applications, including modulation applications. It is also ideal for signal generator applications, and with its low current consumption, it is also suitable for applications in which it can serve as a local oscillator.
The Waveform 3 Click communicates with MCU using the 3-Wire SPI serial interface compatible with standard SPI, QSPI™, MICROWIRE™, DSP interface standards, and operates at clock rates up to 40MHz. Besides, it possesses additional functionality such as a programmable Sleep function that allows external control of the Power-Down mode and Reset function, which resets the appropriate internal registers to 0 to provide an analog output of mid-scale. It is essential to remind that the reset function does not reset the phase, frequency, or control registers.
This Click board™ can be operated only with a 3.3V logic voltage level. The board must perform appropriate logic voltage level conversion before use with MCUs with different logic levels. However, the Click board™ comes equipped with a library containing functions and an example code that can be used, as a reference, for further development