868/916Mhz RF 트랜시버 -IQRF DCTR-72DAT
(IQRF 2 click)
개요
- 본 제품은 868/916Mhz 주파수에서 동작하는 IQRF사의 DCTR-72DAT RF 트랜시버를 탑재한 모듈입니다.
- 3.3V로 동작하며, MCU와 SPI 혹은 UART로 인터페이스합니다.
특징
-
Module features
DCTR-72DAT is an RF transceiver operating in the 868/916 MHz license-free ISM (Industry, Scientific, and Medical) frequency band. Its highly integrated ready-to-use design containing MCU, RF circuitry, serial EEPROM and optional onboard antenna requires no external components.
How the click works
The DCTR-72DAT module's highly integrated ready-to-use design containing MCU, RF circuitry, integrated LDO regulator, serial EEPROM, optional temperature sensor and optional onboard antenna requires no external components.
It has extended RF power results in higher RF range. The ultra-low power consumption fits for battery powered applications.
The module with a built-in operating system significantly reduces application development time. Optional DPA framework supports applications even without programming.
To upload application codes in DCTRs and configure DCTR parameters, CK-USB-04A kit is intended. When the application is uploaded to the IQRF it can be put in microBUS™ socket and communicate with it with MCU.
To upload the firmware put the jumpers in the SPI position.
To use our LibStock library examples the jumpers need to be in UART position.Specifications
Type RF Sub 1GHz Applications Point-to-point or network wireless connectivity, Telemetry, AMR (automatic meter reading), WSN (wireless sensor network), Building automation, Street lighting control, etc. On-board modules DCTR-72DAT RF transceiver Key Features Selectable RF band 868 / 916 MHz, multiple channels Interface UART,Analog,GPIO,SPI Input Voltage 3.3V Compatibility mikroBUS Click board size M (42.9 x 25.4 mm) Pinout diagram
This table shows how the pinout on IQRF 2 click corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
문서
연관제품
- 연관제품 1