2x20W 블루투스 5.0 스테레오 오디오 앰프 모듈
(2x20W Bluetooth 5.0 Stereo Audio Amplifier)
개요
- 본 제품은 스테레오 블루투스 오디오 앰프 모듈입니다.
- 스피커를 직접 연결하여 사용할 수 있으며, 최대 2x20W의 출력을 가집니다.
- 볼륨을 조절하고 음악을 멈출수 있는 작은 스위치가 장착되어 있습니다.
- 입력전압에 따라 출력과 사용할 수 있는 스피커의 종류가 다릅니다. (특징 참조)
특징
-
1>.Width work voltage range2>.Applicable multiple type speakers3>.Knob adjustment4>.Support reverse connection protection5>.Support short circuit protection6>.Self-recovery overheat protection
-
3>.Work Voltage:DC 8V-24V4>.Communication distance:15meter(Max)5>.Channel:Dual channel6>.Output Power(at 1KHz):6.1>.Output power 16W*2 at 12V 4ohm6.2>.Output power 10W*2 at 12V 8ohm6.3>.Output power 15W*2 at 16V 4ohm6.4>.Output power 20W*2 at 20V 4ohm7>.Match speaker(30W~150V):7.1>.4ohm at 8V~12V7.2>.8ohm at 8V~24V7.3>.16ohm at 8V~24V8>.Work Temperature:-40℃~85℃9>.Work Humidity:0%~95%RH10>.Module Size:50*35*14mm
-
Note:1>.The power amplifier board should be as far away as possible from the WIFI signal (router) avoid signal interference.2>.Recommended power supply voltage DC 8~24V.Module will be damaged if input voltage is more than 26V.3>.Input voltage can not more than 12V if connect 4ohm speaker.4>.Input voltage can not more than 24V if connect 8ohm speaker.5>.It is recommended to use a power supply of 2A or higher.6>.It need add extra heat sink if output power is more than 20W*2.7>.Please don’t use too long wires to avoid signal interference.8>.It is recommended to use a speaker above 30W to avoid speaker damage.9>.Please read use manual and description before use.
문서
- how to use
-
1>.Choose the right speaker and connect as shown in wiring diagram.2>.Connect to right power supply from input terminal.LED indicator will flashing and it means that module enters pairing mode.And then speak prompt voice and it means that module is waiting for pairing.3>.Turn ON Bluetooth in phone.4>.Select Bluetooth device ‘XY-P15W’ in your Bluetooth device listing.5>.LED indicator will keep ON and it means that module is successfully connected and is waiting for playing.6>.Module will playing music after select music in phone.LED indicator will keep slowly blinking.7>.Module will speak prompt voice if disconnected.
-