CAN 버스 데이터 로거 / CAN-USB 컨버터 CL2000 -타임스탬프
(CAN BUS LOGGER (+RTC) -8 GB SD)
개요
- 본 제품은 CAN 데이터 로거 및 실시간 CAN-USB 컨버터가 결합된 CL2000 입니다.
- CL1000과는 다르게 로깅된 데이터에 타임스탬프를 찍을 수 있어 각각의 패킷의 시간정보를 확인할 수 있습니다.
- 데이터로거는 PC 없이 데이터를 로깅 받을 수 있으며, 데이터는 USB를 통해 쉽게 추출하여 낼수 있습니다.
- 차량 개발이나 필드 테스트시에 사용하기 적합한 제품으로 다른 CAN 통신을 사용하는 제품의 데이터를 로깅하거나 디버깅시에도 적합합니다.
- Wireshark을 통해 실시간 스트림밍을 이용하여 강력한 리버스 엔지니어링 툴로도 사용이 가능합니다.
-
Streaming OBD2 Data: Analyse and plot human-readable OBD2 data in real-time - ideal for analyzing cars
Reverse Engineering: Use our free plugin streaming tools to aid in reverse engineering raw CAN bus data
Streaming *.DBC Converted Data: Load your *.DBC file and stream human-readable data in real-time
-
- SAE J1939, OBD2, CANopen 어플리케이션에서 사용 또한 가능합니다.
- 로거를 CAN 버스상에 연결하면 자동으로 데이터를 SD카드에 CSV 파일 형식으로 저장하며, USB를 통해 이 데이터를 추출할수 있습니다.
- 무료로 제공되는 소프트웨어인 CANvas 를 통해 CL1000를 설정 raw data를 *.DBC file로 변환이 가능합니다.
- CL1000를 어떤 경우에 사용하여야 하는지 궁금하시다구요? CASES section 를 살펴보시기 바랍니다.
- 데이터 로깅과 Wireshark steaming을 사용하여 CAN 시스템을 리버스 엔지니어링 할 경우에도 사용이 가능합니다. (DDR - Reverse Engineering Proprietary J1939 Data)
- 데이터를 수집하여 (예, NOx, CO, HC, PM, 등등) 적합성 모니터링에 사용이 가능합니다.
- 차량 개발 및 필드 테스팅에 사용이 가능합니다. (Tribine - Logging a Full Harvest Season of Data)
- 부정기 특이 이슈 발견용으로 사용이 가능합니다. (Xcerra - Diagnosing Rare Machine Errors)
특징
-
GENERAL Functionality Data logger and real-time CAN interface LEDs Logger status via three externally visible LEDs Firmware Supports free firmware updates for adding features Software Free CANvas software for configuration, streaming & conversion Safety CE, FCC, IC, RoHS certified CAN BUS Standard Compliant with physical layer standard ISO 11898-2 Identifiers Compliant with CAN specifications 2.0A (11-Bit ID) and 2.0B (29-Bit ID) Bit Rate Bit rates up to 1 Mbps (manually configured or automatically detected) Bit-rate auto-detection Yes Protocol Support Protocol independent (i.e. able to log J1939, CANopen, OBD2, ...) Filters Advanced message filtering on four configurable channels Silent Mode Yes (does not affect CAN-bus transmission) Fail-Safes The device does not terminate the CAN-bus internally DATA LOGGING SD Card Replaceable 8 GB SD card (optional 32 GB) Real-Time Clock Yes (CAN messages are time-stamped with 1ms resolution) Control Signal Logging state (enabled/disabled) can be changed run-time using a CAN-bus control message Heartbeat Signal Supports heartbeat signal to periodically indicate logger status Cyclic Logging Supports cyclic logging mode (oldest log file is deleted when file system is full) Down Sampling CAN ID specific message down-sampling to reduce frequency of logged messages Transmit Transmit up to 20 customized CAN bus messages (e.g. for OBD2 queries) File System Standard FAT file system SUPPLY Power via CAN-bus Power can be supplied from CAN-bus or from the USB Via CAN bus Power supplied by the CAN bus (+7.0V to +36V DC) Protection Reverse voltage protection on CAN-bus supply Transient voltage pulse protection on CAN-bus supply Power via USB Power supplied by USB (+5.0V DC) Consumption The logger's power consumption is approximately 1 W MECHANICAL Enclosure Robust, small enclosure Dimensions 66.7 x 42.7 x 23.5 mm (L x W x H) Weight 45 grams Connector Standard D-sub 9 (DB9) connector (OBD2, J1939, "generic" adaptor optional) Temperature Operating temperature: -20degC to +80degC Real-Time Clock Built-in real-time-clock with calendar and battery backup Date and time information are added to log files Battery backup with more than two years of battery capacity IP Rating IP Rating 30 -
GENERAL
- A 2-in-1 CAN analyzer: CAN logger + real-time CAN interface via USB
- Huge capacity: 8 GB SD card included for stand-alone CAN bus recording (optional 32 GB)
- Real-time clock: With battery backup for date & time stamping CAN data
SIMPLE TO USE
- Plug & play: Log data out of the box with bit-rate auto-detection support
- High Speed CAN: Log any ISO-11898-2 data (e.g. J1939, CANopen, OBD2, …)
- Regular & extended: Supports 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B) identifiers
- Compact: Small robust enclosure the size of a matchbox
- Easily power: Power via USB or CAN bus (via DB9 or a J1939 or OBD2 adaptor)
- Low power usage: ~1 watt in default logging mode - no risk of battery drainage
- LEDs: Logger status easily visible via 3 external LEDs
FREE POWERFUL SOFTWARE
- Free CANvas software: Easy configuration, streaming & data conversion (*.DBC support)
- Wireshark plugin: Powerful Wireshark plugin for wired live-streaming (incl. *.DBC support)
- Conversion options: Process log files with re-structuring, merging & downsampling
- Re-format: Option to convert raw log files to PEAK or Vector CANalyzer formats
- Advanced configurations: Filters, data transmitting, cyclic logging & more
OTHER
- High quality: Designed in Denmark; Made in USA (CE, FCC, IC, RoHS certified)
- Warranty: 2-year warranty as per Danish law
- Support: Free, high quality and fast technical support from our Danish team
- Updates: Free firmware/software upgrades
문서
-
For more detailed information, please refer to the product manual.
The logger firmware is regularly updated with new features & improvements. For latest updates cf. the changelog.
- FREE CANVAS SOFTWARE
With the CL1000 you also get our free CANvas software. This lets you easily configure your CL1000, stream data and convert logged data.
In particular, CANvas gives you multiple powerful conversion features:
- Convert log files with *.DBC & OBD2 support
- Merge log files - or append to an existing output file
- Re-format log files to Vector's ASCII format or PEAK's PCAN format
- Customize output format - creating e.g. Excel pivot ready formats
