M.2 M Key - PCIe3.0x16 그래픽 카드 확장 케이블
(M.2 M Key to PCIe3.0x16 Graphics Card Extension Cable
(LattePanda Sigma))
개요
- 본 제품은 M.2 M Key - PCIe3.0x16 그래픽 카드 확장 케이블입니다.
- LattePanda Sigma 용 그래픽 카드 확장 케이블입니다.
특징
- This is an M.2 M Key to PCIe3.0x16 graphics card extension cable specially prepared for LattePanda Sigma users. It has a PCIex16 card slot, a differential signal hole-free design, and no signal attenuation and interference problems in parasitic capacitance and parasitic inductance. No driver installation is required, just plug and play. It can be easily paired with an external graphics card or PCIe device on the Sigma motherboard to maximize LattePanda Sigma's performance.
-
Note:
1. Be sure to know the direction when plugging in the wire, and do not plug it in backwards or out of position to prevent burning the device. When plugging in, hold the socket of the device before plugging in the cord to avoid using too much force to disconnect the socket pins. Do not bend or pull within 2cm of the welding point between the two ends of the wire and the circuit board.
2. Depending on the signal drive capabilities of various motherboards and devices, the signal may experience attenuation when an extension cable is connected.
- High-quality PCIex16 card slot
- PCIe3.0x4, bandwidth up to 32G/bps
- Using metal layer shielded wire, it can be bent and folded
- Card slot: PCIex16
- Specifications: PCIe 3.0x4
- Transmission rate: 8GT/S
- Bandwidth: 32G/bps(Max)
- Rated power: 75W (Max)
- Insulation resistance: 95MΩ-Km (Min)
- Differential impedance: 95Ω
- Line pair matching impedance: ±10Ω
- Working temperature: -20°C ~80°C
- Cord length: 20cm