2축 MEMS 자이로 센서 -ICG-1020S

(GYRO 7 CLICK)

개요

  • 본 제품은 2축 MEMS 자이로 센서 -ICG-1020S 입니다.
  • ICG-1020S 을 장착하고 있으며, SPI 인터페이스를 가지고 있습니다.
  • 3.3V 시스템과 사용이 가능합니다.

특징

  • HOW DOES IT WORK?

    Gyro 7 Click as its foundation uses the ICG-1020S, a high-performance 2-axis gyroscope from TDK InvenSense. The ICG-1020S is highly configurable with a full-scale programmable range from ±46.5dps to ±374dps. The single structure vibratory MEMS rate gyroscope detects the X- and Y-axis rotation. When the gyroscope is rotated about any sense axes, the Coriolis effect causes a detected vibration. The resulting signal is amplified, demodulated, and filtered to produce a proportional voltage to the angular rate. With its 2-axis integration, this Click board™ allows customers' to design it into an optical image stabilization (OIS) application.

    gyro 7 click inner

    Two-axis MEMS rate gyroscope sensor, the ICG-1020S, comes with integrated 16-bit ADCs and signal conditioning with two axes XY configuration. After the signal is digitized, data is processed through a digital filter and output through sensor data registers. Besides, the ICG-1020S is also characterized by high resolution and low RMS noise, noise density, a fast sample rate at up to 32kHz, and low power consumption.

    Gyro 7 Click communicates with MCU through a register-selectable standard SPI interface that enables high clock speed up to 20MHz, supporting the two most common SPI modes, SPI Mode 0 and 3. Other blocks include onboard clocking, temperature compensation, and bias circuits. The sensor data registers contain the latest gyro data, and they are read-only registers accessible via the serial interface. Data from these registers may be read anytime. It also possesses an additional interrupt signal, routed on the INT pin of the mikroBUS™ socket labeled as INT, indicating when a specific interrupt event occurs.

    This Click board™ can be operated only with a 3.3V logic voltage level. The board must perform appropriate logic voltage level conversion before using MCUs with different logic levels. However, the Click board™ comes equipped with a library containing functions and an example code that can be used, as a reference, for further development.

    SPECIFICATIONS

    Type Motion
    Applications Can be used for optical image stabilization (OIS) applications
    On-board modules ICG-1020S - dual-axis MEMS angular rate sensor (gyroscope) from TDK InvenSense
    Key Features Low power consumption, full-scale programmable range up to ±374dps, integrated 16-bit ADCs, user-programmable digital filters, interrupt, high performance, reliability, and more
    Interface SPI
    Compatibility mikroBUS
    Click board size S (28.6 x 25.4 mm)
    Input Voltage 3.3V

문서

연관제품