스파크펀 아르테미스 개발 키트 -카메라 모듈, 아두이노, 음성,이미지 머신러닝

(SparkFun Artemis Development Kit with Camera)

 

개요

  • 본 제품은 스파크펀 아르테미스 개발 키트 -카메라 모듈, 아두이노, 인공지능입니다.
  • 스파크펀 아르테미스 모듈을 기반으로 디자인된 제품이며 Himax camera 모듈이 포함되어 있습니다.
  • 본 제품을 프로그래밍하는데 필요한 소프트웨어로 아두이노 IDE, ARM Mbed OS(Studio & CLI), AmbiqSDK를 추천합니다.
  • 향상된 USB 인터페이스(MKL26Z128VFM4 Arm® Cortex®-M0+ MCU)로 보드는 아래와 같이 동작할 수 있습니다.
    • Mass Storage Device (MSD): Used to provide drag and drop programming to the Artemis Module.
    • Human Interface Device (HID): Used for the debugging interface to the Artemis Module.
    • Communication Port (COM): Used to provide a serial communication UART between the Artemis and the USB connection (PC).
  • 아르테미스 모듈은 Cortex-M4F 코어로 BLE5.0을 지원하며, 아두이노와 같이 프로그래밍이 가능합니다.
  • ARM Mbed OS 혹은 AmbiqSDK 같은 RTOS 실행이 가능합니다.
  • 3축 LIS2DH12TR가속도 센서, MEMS 마이크로폰, edge 카메라 커넥터를 장착하고 있어, TensorFlow 및 머신러링을 이용하여 always-on voice command 와 이미지 인식 등의 인공지능 어플리케이션을 시험하여 볼수 있습니다.

특징

  • Artemis Dev Kit

    • Compatible with Arduino, Mbed™ OS, and AmbiqSDK Development Programs
    • Power:
      • 5V Provided Through the USB-C Connector
      • 1.8V, 3.3V, and 5V Available on Power Header
    • Interface Chip (MKL26Z128VFM4 ARM® Cortex®-M0+ MCU):
      • Drag and Drop Programming
      • SWD Interface
      • JTAG Programming PTH
    • Artemis Module:
      • Apollo3 ARM® Cortex®-M4F MCU
      • BLE 5.0 with FCC Certification
      • 24 Breakout I/O Pins
        • Eight 14-bit ADC Pins
        • Eighteen 16-bit PWM Pins
        • Two Independent UART Ports
        • Three Peripheral I2C/SPI Buses
      • JTAG Programming PTH
    • Sensors:
      • 3-axis Accelerometer (LIS2DH12)
      • PDM Microphone (SPH0641LM4H-1)
      • Camera Connector (for the Himax HM01B0 Camera)
    • Qwiic Connector
      • On Primary I2C Bus

    Himax HM01B0 Camera

    Image Sensor

    • Ultra Low Power Image Sensor (ULPIS) designed for Always On vision devices and applications
    • High sensitivity 3.6µ BrightSenseTM pixel technology
    • 320 x 320 active pixel resolution with support for QVGA window, vertical flip and horizontal mirror readout
    • Programmable black level calibration target, frame size, frame rate, exposure, analog gain (up to 8x) and digital gain (up to 4x)
    • Automatic exposure and gain control loop with support for 50 / 60Hz flicker avoidance
    • Flexible 1bit, 4bit and 8bit video data interface with video frame and line sync
    • Motion Detection circuit with programmable ROI and detection threshold with digital output to serve as an interrupt
    • On-chip self oscillator
    • I2C 2-wire serial interface for register access
    • High CRA for low profile module design

    Sensor Parameters

    • Active Pixel Array 320 x 320
    • Pixel Size 3.6 µm x 3.6 µm
    • Full Image Area 1152 µm x 1152 µm
    • Diagonal (Optical Format) 1.63 mm (1/11″)
    • Color Filter Array Monochrome and Bayer
    • Scan Mode: Progressive
    • Shutter Type: Electronic Rolling Shutter
    • Frame Rate MAX 51 fps @ 320 x 320, 60 fps @ 320 x 240 (QVGA)
    • CRA (maximum) 30º

    Sensor Specifications

    • Supply Voltage: Analog - 2.8 V, Digital - 1.5V (Internal LDO: 1.5V – 2.8V), I/O - 1.5 – 2.8V
    • Input Reference Clock: 3 – 50 MHz
    • Serial Interface (I2C): 2-wire, 400 KHz max.
    • Video Data Interface: 1b, 4b, 8b with frame / line SYNC
    • Output Clock Rate MAX: 50 MHz for 1bit, 12.5 MHz for 4bit, 6.25 MHz for 8bit
    • Est. Power Consumption (include IO with 5pF load):
      • QVGA 60FPS (Typical) <4 mW
      • QVGA 30FPS (Typical) <2 mW
  • include

문서

연관제품