라즈베리 파이 컴퓨트 모듈 3+ Lite -CM3+ Lite

(Raspberry Pi Compute Module 3+ Lite)

IMG_0242

IMG_0242

개요

  • 본 제품은 라즈베리 파이 컴퓨트 모듈 3+ Lite 입니다.
  • 라즈베리 파이3 모델 B+의 핵심 코어(BCM2837 processor, 1GB LPDDR2 RAM)을 포함하고 있는 제품입니다.
  • 이 제품을 이용하여 자신만의 커스텀 하드웨어를 디자일 할 수 있게 고안된 제품입니다.

특징

  • Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.2GHz
  • 1GB LPDDR2 SDRAM
  • Operating Supply Voltage: 1.8V, 3.3V
  • Minimum Operating Temperature: -25C
  • Maximum Operating Temperature: +80C
  • HDMI, MIPI, USB, and GPIO interfaces on edge connector

  • This is all integrated onto a small (67.6mm × 31mm) board that fits into a standard DDR2 SODIMM connector. You get the full flexibility of the BCM2837 SoC (which means that many more GPIOs and interfaces are available than with a standard Raspberry Pi), and designing the Module into a custom system should be relatively straightforward because all the tricky bits have been put onto the Module itself.

    The CM3+ Lite product is the same as CM3+ except the eMMC Flash is not fitted, and the SD/eMMC interface pins are available for the user to connect their own SD/eMMC device. Note that the CM3+ is electrically identical and, with the exception of higher CPU z-height, physically identical to the legacy CM3 products.

    Note: The CM3+ modules require a software/firmware image dated November 2018 or newer to function correctly.

문서

연관제품