유연 와이어 네오픽셀 -50 네오픽셀
(Adafruit Soft Flexible Wire NeoPixel Strand - 50 NeoPixels)
개요
- 본 제품은 유연 와이어 네오픽셀 -50 네오픽셀입니다.
- 50개의 개별적으로 주소연산이 가능한 네오픽셀이 부드럽고 유연한 와이어에 장착되어 있는 제품입니다.
- 10cm 간격으로 LED가 장착되어 있으며, 총 50개의 LED가 장착되어 있습니다.
- 5V전원으로 동작합니다.
특징
-
The strip is made of flexible wires with a coated NeoPixel every ~100mm (~4 inches) with a total of 50 LEDs. It does not come with weatherproof sheathing so you cannot wash these or dunk them underwater. You can cut the strand pretty easily with wire cutters. Note that while the wires are coated so they don't short against each other, that coating will wear off over time especially when flexed, so avoid abrasion or repeated flexing of the connector cables.
Connecting to these is a little tricky because there's no power/data markings (there's no PCB!) So instead, look at the twisted stranded wires that connect the NeoPixels. The data wire is the middle wire. The ground wire is marked with a light red stripe. The remaining wire is +5V power. Note that if you're connecting to the JST cable, the red wire on that cable may not be soldered the red wire on the NeoPixel strand!
The strands come with connectors pre-attached but you can carefully solder to the flexible wires as well. Of course, you can also connect strands together to make them longer, just watch how much current you need! We have a 5V/4A supply that should be able to drive 1 meter and a 5V/10A supply that can drive up to 10 meters (depending on use) You must use a 5V DC power supply to power these strips, do not use higher than 6V or you can destroy the entire strip.