2.13인치 E-Ink 디스플레이 HAT -라즈베리용

(2.13inch E-Ink display HAT for Raspberry Pi &

 Arduino yellow/black/white 3 color e paper)

개요

  • 본 제품은 라즈베리용 2.13인치 전자 종이 디스플레이 HAT 입니다.
  • 212x104 해상도를 가지고 있으며, 전자 종이 컨트롤러와는 SPI 인터페이스를 이용하여 통신이 가능합니다.
  • 빨강, 검정, 흰색의 세가지 색상을 지원합니다.
  • 매우 낮은 전력 소비, 넓은 화각, 전기가 없어도 화면을 표시하는 전자 종이 고유의 특성을 가진 제품입니다.

특징

  • No backlight, keeps displaying last content for a long time even when power down

    - Ultra low power consumption, basically power is only required for refreshing

    - Compatible with Raspberry Pi 2B/3B/Zero/Zero W

    - Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.

    - Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

  • Technical Details

    Dimensions 114mm x 64mm x 34mm
    Weight G.W 18g     N.W 14g
    Battery Exclude
    Specifications
    Operating voltage 3.3V
    Interface 3-wire SPI, 4-wire SPI
    Outline dimension 65mm × 30.2mm
    Display size 23.71mm × 48.55mm
    Dot pitch 0.229 × 0.228
    Resolution 212 × 104
    Display color yellow, black, white
    Grey level 2
    Full refresh time 15s
    Refresh power 26.4mW(typ.)
    Standby power <0.017mW
    Viewing angle >170°
    Interface
    VCC 3.3V
    GND Ground
    NC NC
    DIN SPI MOSI pin
    CLK SPI SCK pin
    CS SPI chip selection, low active
    DC Data/Command selection (high for data, low for command)
    RST External reset, low active
    BUSY Busy status output, low active

    Part List

    2.13inch e-Paper HAT (C) 1
    RPi screws pack (2pcs) 1
    PH2.0 20cm 8Pin 1

문서

연관 제품