2.4Ghz 무선 DMX512 컨트롤러/리시버 -안테나 포함

(2.4Ghz Wireless DMX512 Controller/Receiver with Antenna)

개요

  • 본 제품은 2.4Ghz 무선 DMX512 리시버 트랜스미터입니다.
  • 콘솔에서 생성된 표준 DMX512 프로토콜 데이터를 무선으로 전송할 수 있어 콘솔과 조명사이에 케이블 설치가 불가능할 경우 유용하게 사용할 수 있습니다.
  • 통신거리는 개활지에서 대략 400미터가량 됩니다.
  • 보드를 조명과, DMX 컨트롤러에 각각 연결하여 사용합니다.
  • 6개까지의 트랜스미터는 같은 DMX 주소상에서 간섭 없이 사용이 가능합니다.
  • UART, RS485 인터페이스를 갖고 있습니다.

특징

  • Input:   5 V DC
    Working range:   approx. 400 m
    Frequency:   2,4 GHz ISM, 126 channels
    Receiving sensitivity:   -94
    Signal port:   RS485 or CPU - AURT
    Board dimensions:   75 x 18 x 15 mm (without antenna)
    Weight:   20 g
     

문서

  • Operating manual:
     ID code and LED color corresponding correlation:
    1: RED
    2: GREEN
    3: RED+GREEN = YELLOW
    4: BLUE
    5: RED+BLUE = PURPLE
    6: GREEN+BLUE = CYAN
    7: RED+GREEN+BLUE = WHITE
     
    Press key 1 time to indicate ID setting, press again to set ID, then ID value adding 1 each time by press.
     
    Working condition:
    LED constant litght up: no DMX or wireless signal.
    Red LED flash: transmitting.
    Green LED flash: Receiving
    RF frequency------2. 400-2. 525 G, total 126 channels, it is searching automatically.
    ID Code-------"1-7" groups ID code, press "key" button for setting, it only can work under same ID code of transmitter and receiver.
     
    Establishing Communication:
    1. Power on DMX512 wireless received board and transmitted board.
    2. Press "key" button to set same ID value of transmitter board and receiver board, please use different ID value if you need use more than 1 group wireless net at same time in same place.
    3. The red LED flashes when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section. Green LED flash till received corrected same ID value, LED flash faster once DMX data faster.
    4. Communication was established correctly then.

연관 제품