Onion Omega2 메이커 키트 -IOT 실험 키트

(Omega2+ Maker Kit)

개요

  • 본 제품은 IoT 개발 키트 Omega2+ 메이커 키트입니다.
  • Omega 보드와 포함돤 확장보드 및 부품을 이용하여 서보, DC 모터를 제어하고 OLED에 글자와 이미지를 디스플레이하고, 릴레이를 제어하는 실험(특징의 example참고) 등을 하여 볼 수 있습니다.

특징

  • example
    • Blinking an LED — Learn the basics of programming the Omega by turning an LED on and off.
    • Blinking Multiple LEDs — Learn some more programming concepts by controlling multiple LEDs at once.
    • Fading an LED — Create a cool LED fading effect using the Pulse Width Modulation (PWM) technique.
    • Reading a Switch — Use a physical switch to control an LED through the Omega.
    • Using a Shift Register — Use a shift register chip to control eight LEDs using only a few GPIOs.
    • Controlling a 7-Segment Display — Add a 7-segment display to the previous circuit to display numbers.
    • Reading a 1-Wire Temperature Sensor — Use a 1-wire temperature sensor to read the ambient temperature.
    • Controlling an LCD Screen — Use the I2C protocol to control an LCD screen attached to the previous circuit.
    • Dimming LEDs — Learn about Pulse Width Modulation and controlling LEDs.
    • Controlling Servos — Use the PWM Expansion to control servos and pick up some Python skills along the way.
    • Run a DC Motor With an H-Bridge — Get really creative and use the PWM Expansion to control an H-Bridge chip, which will in turn drive a DC motor.
    • Writing Text to the Screen — We'll use Python to programmatically write text to the screen.
    • Changing the Screen's Settings — Learn how to use user input to change display settings.
    • Draw Lines — Prompt the user for input and use it to draw lines on the screen.
    • Controlling Isolated Circuits — Learn how to control circuits electrically isolated from the Omega's circuits.
  • include
    • 1x Onion Omega2+ IoT Computer
    • 1x Expansion Dock for Onion Omega
    • 1x OLED Expansion Board for Onion Omega
    • 1x Servo Expansion Board for Onion Omega
    • 1x Relay Expansion Board for Onion Omega
    • 1x Breadboard
    • 1x Futaba Standard-Sized Servo
    • 1x Generic Sub-Micro-Sized Servo
    • 1x DC Hobby Motor
    • 1x 7-Segment Display (Red LED)
    • 1x LCD Screen (16x2)
    • 1x Shift Register (74HC595)
    • 1x H-Bridge Controller (SN754410)
    • 1x Digital Temperature Sensor
    • 1x Buzzer
    • 5x Slide Switch
    • 12x Tactile Push Button
    • 1x Wall Charger
    • 1x Braided USB Micro-B Cable
    • 20x Multicolor LEDs
    • 5x 100nF Ceramic Capacitor
    • 20x 200Ω Resistor
    • 10x 1kΩ Resistor
    • 5x 100Ω Resistor
    • 5x 470Ω Resistor
    • 5x 5.1kΩ Resistor
    • 5x 51kΩ Resistor
    • 20x Jumper Wire (M/M)
    • 20x Jumper Wire (M/F)

문서

연관제품