상품상세 정보

뒤로가기

TCA8418 키패드 매트릭스 및 I2C GPIO 확장 모듈 (Adafruit TCA8418 Keypad Matrix and GPIO Expander Breakout - STEMMA QT / Qwiic)

TCA8418 키패드 매트릭스 및 I2C GPIO 확장 모듈 (Adafruit TCA8418 Keypad Matrix and GPIO Expander Breakout - STEMMA QT / Qwiic)

상품 정보
판매가(VAT별도) 10680
할인판매가 10,680원 (10,680원 할인)
할인금액 총 할인금액 원
(모바일할인금액 원)
적립금

10원(0.10%)

무통장 결제시 적립금 %

카드 결제시 적립금 %

실시간 계좌이체시 적립금 %

적립금 결제시 적립금 %

휴대폰 결제시 적립금 %

예치금 결제시 적립금 %

에스크로 결제시 적립금 %

가상계좌 결제시 적립금 %

가상계좌 결제시 적립금 %

케이페이 결제시 적립금 %

페이나우 결제시 적립금 %

페이코 결제시 적립금 %

제휴적립금
배송방법 택배
배송비 3,500원 (100,000원 이상 구매 시 무료)
상품 추가설명 번역정보
배송
수량 up down  
상품 목록
상품 정보 가격 삭제
총상품금액(수량) 0
구매하기
구매하기




 

TCA8418 키패드 매트릭스 및 I2C GPIO 확장 모듈

(Adafruit TCA8418 Keypad Matrix and GPIO Expander

Breakout - STEMMA QT / Qwiic)

개요

  • 본 제품은 TCA8418 키패드 매트릭스 및 I2C GPIO 확장 모듈 입니다.
  • I2C GPIO 확장 모듈 및 키패드 매트릭스 드라이버로 총 18개의 I/O 핀(10 columns and 8 rows)을 가지고 있습니다.
  • 총 80개(8x10)의 스위치에 I/O를 할당 할 수 있습니다.

특징

  • Note: You may get an off-white or black JST connector.

    TCA8418 Specs:

    • Supports 80 Buttons With Use of 18 GPIOs
    • Supports QWERTY Keypad Operation Plus GPIO Expansion
    • Low Standby (Idle) Current Consumption: 3 μA (not including breakout board regulator and LED)
    • Supports 1-MHz Fast Mode Plus I2C Bus
    • 10 Byte FIFO to Store 10 Key Presses and Releases
    • Open-Drain Active-Low Interrupt Output
    • Integrated Debounce Time of 50 μs

    Product Dimensions: 35.5mm x 17.7mm x 4.6mm / 1.4" x 0.7" x 0.2"

    Product Weight: 2.5g / 0.1oz

  • It's a GPIO expander, it's a keypad matrix driver... its the Adafruit TCA8418 Keypad Matrix and GPIO Expander Breakout - a cute and powerful I2C GPIO expander and keypad matrix driver! This chip is quite fancy, with the ability to act as your I2C multi-tool for handling keypads, buttons or LEDs.

    This chip has 18 total 'I/O' pins, 10 columns and 8 rows. You can of course arrange them as a matrix of buttons for a total of 80 switches. Or you can use any subset as individual GPIO input or outputs. The nicest part of the keypad driver is that it has a 10-element event queue, so even if you don't get to the interrupt immediately, keypress and release events will be held for you. Since it's I2C its very easy to use with any microcontroller or computer.

    GPIO expanders work like this: you have a board with some number of GPIO but not enough for your project - maybe you need more buttons or LEDs. You could upgrade to a board with massive number of GPIO like the Grand Central, or you could pop on one of these boards. Connect it over I2C and then you can send/receive I2C commands to control the GPIO pins to write and read them. It's going to be slower than direct GPIO access, but maybe that doesn't matter if it takes a millisecond instead of a microsecond. You only need the two I2C pins, and you can even share the I2C port with other sensors and devices. Heck, you can even add more expanders for massive I/O control!

    For GPIO expansion, any of the 18 pins can be used as input or output. For inputs, you can also set an optional pull-up and an interrupt output on the INT pin for rising or falling signals. There's also a debouncer that can add a little low-pass filtering for noisy tactile switches. For outputs, you can set them high or low, great for basic LED driving.

    For Keypad Matrix driving, theres up to 10 columns and 8 rows. You cannot change a row into a column or vice versa. Pull-ups and matrix scanning is handled for you, with key presses and releases recorded into a 10-element FIFO queue. You can of course set up interrupt output on key press or release so you don't have to poll over and over again. 

    We've written both Arduino and CircuitPython/Python libraries for the TCA8418, so you can get started whether you have an Arduino-compatible UNO or a Raspberry Pi 4 - or anything in between. There's also a Linux Kernel driver module if you want to have this natively supported by a single-board-computer.

    To get you going fast, we spun up a custom-made PCB in the STEMMA QT form factor, making it easy to interface with. There's a built in 3.3V regulator and level shifting on the I2C lines so you can use this with 3V or 5V microcontrollers.

    The STEMMA QT connectors on either side are compatible with the SparkFun Qwiic I2C connectors. This allows you to make solderless connections between your development board and the TCA8418 or to chain it with a wide range of other sensors and accessories using a compatible cableQT Cable is not included, but we have a variety in the shop

문서

연관제품

상품 상세 정보
상품명 TCA8418 키패드 매트릭스 및 I2C GPIO 확장 모듈 (Adafruit TCA8418 Keypad Matrix and GPIO Expander Breakout - STEMMA QT / Qwiic)
판매가(VAT별도) 10,680원
상품코드 P000BFWC
수량 수량증가수량감소
상품요약정보 TCA8418 키패드 매트릭스 및 I2C GPIO 확장 모듈 입니다.

결제 안내

결제는 신용카드, 실시간 계좌이체, 무통장 입금 등을 선택하여 진행하실 수 있습니다. 세금계산서 발행을 요청하실 경우에는 결제방법을 무통장 입금으로 선택하시고 사업자등록증 사본을 cs@vctec.co.kr으로 보내주셔야 합니다.

배송 안내

  • 배송 방법 : 택배
  • 배송 지역 : 전국지역
  • 배송 비용 : 3,500원
  • 배송 기간 : 1일 ~ 10일
  • 배송 안내 : - 산간벽지나 도서지방은 별도의 추가금액을 지불하실 수 있습니다.
    - 상품종류에 따라서 상품의 배송이 다소 지연될 수 있습니다.
    - 구매 총액이 10만원 미만의 주문 경우는 택배발송시에는 배송비 3,500원이 추가됩니다.
    - 구매 총액 10만원 미만 주문의 퀵발송 및 급행처리 요청시 핸들링 비용 3,500원이 추가 됩니다.
    - 매장이 아니므로 방문구매 및 수령이 불가능 합니다.
    - 영업일 기준 2일 이내 미출고 물품은 해외 수입 제품입니다.
    - 높은 전압과 전류를 사용하는 제품은 사용 전 안전에 유의 바랍니다.
    - 제품을 교육수준으로 설명하거나 사용자 프로젝트에 대한 컨설팅이나 기술지원을 하지 않사오니 참고부탁 드립니다.

교환/반품 안내

교환 및 반품안내
- 상품을 공급 받으신 날로부터 7일이내에 교환 및 반품이 가능하며,
- 미개봉/미설치 제품인 경우이거나 불량제품인 경우에 한해 가능합니다.

- 교환/반품시 승인 없이 제품을 먼저 발송시 왕복 택배비가 발생합니다.
- 상품가치가 훼손되어 재판매가 불가능 할 경우는 교환/반품이  불가능합니다.
- 소프트웨어는 개봉시 교환/반품이 불가능합니다.

- 주문수입제품의 경우는 환불/교환이 불가능합니다.

- 수입제품의 경우는 수리가 불가능합니다.
- 배송지연안내를 받으신 경우는 주문 수입되는 경우이며, 주문 수입 제품의 경우 환불/교환이 불가능합니다.

- 고객변심에 의한 교환 및 반품 시 왕복 배송비는 고객님께서 부담하셔야 합니다.
- 제품구성품 및 스펙은 제조사 사정에 의해 예고없이 변경 될수도 있습니다.

환불 안내

환불시 반품 확인여부를 확인한 후 7영업일 이내에 결제 금액을 환불해 드립니다.
신용카드로 결제하신 경우는 신용카드 승인을 취소하여 결제 대금이 청구되지 않게 합니다.
(단, 신용카드 결제일자에 맞추어 대금이 청구 될수 있으면 이경우 익월 신용카드 대금청구시 카드사에서 환급처리됩니다.)

서비스문의 안내

상품사용후기

상품후기쓰기 모두보기

게시물이 없습니다

상품 Q&A

상품문의하기 모두보기

게시물이 없습니다

판매자 정보