상품상세 정보

뒤로가기

INA250 전류 측정 센서 -아날로그 출력 (CURRENT 4 CLICK)

INA250 전류 측정 센서 -아날로그 출력 (CURRENT 4 CLICK)

상품 정보
판매가(VAT별도) 25080
할인판매가 25,080원 (25,080원 할인)
할인금액 총 할인금액 원
(모바일할인금액 원)
적립금

20원(0.10%)

무통장 결제시 적립금 %

카드 결제시 적립금 %

실시간 계좌이체시 적립금 %

적립금 결제시 적립금 %

휴대폰 결제시 적립금 %

예치금 결제시 적립금 %

에스크로 결제시 적립금 %

가상계좌 결제시 적립금 %

가상계좌 결제시 적립금 %

케이페이 결제시 적립금 %

페이나우 결제시 적립금 %

페이코 결제시 적립금 %

제휴적립금
배송방법 택배
배송비 3,500원 (100,000원 이상 구매 시 무료)
상품 추가설명 번역정보
배송
수량 up down  
상품 목록
상품 정보 가격 삭제
총상품금액(수량) 0
구매하기
구매하기




 

INA250 전류 측정 센서 -아날로그 출력

(CURRENT 4 CLICK)

개요

  • 본 제품은 INA250 전류 측정 센서 -아날로그 출력 입니다.
  • INA250 칩을 장착하고 있으며, 전류 측정값에 따라 전압을 출력합니다.
  • 3.3V/5V 시스템과 사용이 가능합니다.

특징

  • Current 4 Click as its foundation uses the INA250, a current-sense amplifier with a high-precision, low-drift shunt resistor which can deliver highly accurate measurements over a wide temperature range from Texas Instruments. The INA250 measures the voltage developed across the internal current-sensing resistor when current passes through it. The integrated 2mΩ shunt resistor offers 0.1% tolerance and low drift of 15pmm/°C, enabling the higher performance of the end equipment. This amplifier allows for high-accuracy current measurements at common-mode voltages and offers a maximum error of 0.84% over the temperature range from -40 to +125°C.

    Current 4 inneri

    Current 4 Click communicates with MCU using only one pin routed on the AN pin of the mikroBUS™ socket. The output analog signal from INA250 is forwarded to the input of the operational amplifier, the LMV321 low-voltage rail-to-rail OpAmp from Texas Instruments, which represents the most cost-effective solution for applications where low voltage operation is needed. The output of the LMV321 OpAmp has a stable unity-gain, acting as a buffer so that the host MCU can sample the output voltage of the INA250 via the AN pin of the mikroBUS™ socket.

    The INA250 can be configured to measure both unidirectional and bidirectional currents through the reference voltage level. For unidirectional operation, the reference pin should be tied to the ground. When the current increases, the output signal also increases upwards from this reference voltage (or ground in this case). For bidirectional currents, an external voltage source can be used as the reference voltage, in this case, a low dropout linear regulator AP7331 from Diodes Incorporated to provide the 2.5V reference supply voltage for the INA250. The reference voltage level can be selected by positioning the SMD jumper labeled VREF SEL to an appropriate position choosing between 2.5V provided by AP7331 or GND.

    This Click board™ can operate with both 3.3V and 5V logic voltage levels selected via the VCC SEL jumper. This way, it allows both 3.3V and 5V capable MCUs to use the communication lines properly. However, the Click board™ comes equipped with a library containing easy-to-use functions and an example code that can be used, as a reference, for further development.

  • Type Measurements
    Applications Can be used for applications such as test and measurement, load monitoring and power supplies, automotive, and many more
    On-board modules INA250 - current-sense amplifier with a high-precision, low-drift shunt resistor which can deliver highly accurate measurements over a wide temperature range from Texas Instruments
    Key Features Low power consumption, precise integrated shunt resistor, high accuracy, 500mV/A gain, zero-drift, uni/bidirectional current measurements, and more
    Interface Analog
    Compatibility mikroBUS
    Click board size M (42.9 x 25.4 mm)
    Input Voltage 3.3V or 5V

문서

연관 제품

상품 상세 정보
상품명 INA250 전류 측정 센서 -아날로그 출력 (CURRENT 4 CLICK)
판매가(VAT별도) 25,080원
상품코드 P000BCFP
수량 수량증가수량감소
상품요약정보 INA250 전류 측정 센서 -아날로그 출력 입니다.

결제 안내

결제는 신용카드, 실시간 계좌이체, 무통장 입금 등을 선택하여 진행하실 수 있습니다. 세금계산서 발행을 요청하실 경우에는 결제방법을 무통장 입금으로 선택하시고 사업자등록증 사본을 cs@vctec.co.kr으로 보내주셔야 합니다.

배송 안내

  • 배송 방법 : 택배
  • 배송 지역 : 전국지역
  • 배송 비용 : 3,500원
  • 배송 기간 : 1일 ~ 10일
  • 배송 안내 : - 산간벽지나 도서지방은 별도의 추가금액을 지불하실 수 있습니다.
    - 상품종류에 따라서 상품의 배송이 다소 지연될 수 있습니다.
    - 구매 총액이 10만원 미만의 주문 경우는 택배발송시에는 배송비 3,500원이 추가됩니다.
    - 구매 총액 10만원 미만 주문의 퀵발송 및 급행처리 요청시 핸들링 비용 3,500원이 추가 됩니다.
    - 매장이 아니므로 방문구매 및 수령이 불가능 합니다.
    - 영업일 기준 2일 이내 미출고 물품은 해외 수입 제품입니다.
    - 높은 전압과 전류를 사용하는 제품은 사용 전 안전에 유의 바랍니다.
    - 제품을 교육수준으로 설명하거나 사용자 프로젝트에 대한 컨설팅이나 기술지원을 하지 않사오니 참고부탁 드립니다.

교환/반품 안내

교환 및 반품안내
- 상품을 공급 받으신 날로부터 7일이내에 교환 및 반품이 가능하며,
- 미개봉/미설치 제품인 경우이거나 불량제품인 경우에 한해 가능합니다.

- 교환/반품시 승인 없이 제품을 먼저 발송시 왕복 택배비가 발생합니다.
- 상품가치가 훼손되어 재판매가 불가능 할 경우는 교환/반품이  불가능합니다.
- 소프트웨어는 개봉시 교환/반품이 불가능합니다.

- 주문수입제품의 경우는 환불/교환이 불가능합니다.

- 수입제품의 경우는 수리가 불가능합니다.
- 배송지연안내를 받으신 경우는 주문 수입되는 경우이며, 주문 수입 제품의 경우 환불/교환이 불가능합니다.

- 고객변심에 의한 교환 및 반품 시 왕복 배송비는 고객님께서 부담하셔야 합니다.
- 제품구성품 및 스펙은 제조사 사정에 의해 예고없이 변경 될수도 있습니다.

환불 안내

환불시 반품 확인여부를 확인한 후 7영업일 이내에 결제 금액을 환불해 드립니다.
신용카드로 결제하신 경우는 신용카드 승인을 취소하여 결제 대금이 청구되지 않게 합니다.
(단, 신용카드 결제일자에 맞추어 대금이 청구 될수 있으면 이경우 익월 신용카드 대금청구시 카드사에서 환급처리됩니다.)

서비스문의 안내

상품사용후기

상품후기쓰기 모두보기

게시물이 없습니다

상품 Q&A

상품문의하기 모두보기

게시물이 없습니다

판매자 정보