상품상세 정보

뒤로가기

써모커플 앰프 -LTC2986, Thermocouple (TEMP PROBE CLICK)

써모커플 앰프 -LTC2986, Thermocouple (TEMP PROBE CLICK)

상품 정보
판매가(VAT별도) 127530
할인판매가 127,530원 (127,530원 할인)
할인금액 총 할인금액 원
(모바일할인금액 원)
적립금

140원(0.10%)

무통장 결제시 적립금 %

카드 결제시 적립금 %

실시간 계좌이체시 적립금 %

적립금 결제시 적립금 %

휴대폰 결제시 적립금 %

예치금 결제시 적립금 %

에스크로 결제시 적립금 %

가상계좌 결제시 적립금 %

가상계좌 결제시 적립금 %

케이페이 결제시 적립금 %

페이나우 결제시 적립금 %

페이코 결제시 적립금 %

제휴적립금
배송방법 택배
배송비 3,500원 (100,000원 이상 구매 시 무료)
상품 추가설명 번역정보
배송
수량 up down  
상품 목록
상품 정보 가격 삭제
총상품금액(수량) 0
구매하기
구매하기




 

써모커플 앰프 -LTC2986, Thermocouple

(TEMP PROBE CLICK)

개요

  • 본 제품은 써모커플 앰프 -LTC2986 입니다.
  • K 타입 써모커플 프로브를 모듈에 장착된 PCC-SMP 커넥터에 연결하여 사용할 수 있으며, 0.1도의 정확도와 0.001도의 분해능을 지원합니다.
  • SPI 인터페이스를 지원하며, 3.3V/5V 시스템과 사용이 가능합니다.

특징

  • Temp Probe Click is based on the LTC2986, a high accuracy thermocouple temperature monitoring system with 0.1°C accuracy and 0.001°C resolution from Analog Devices. The LTC2986 simultaneously measures the thermocouple output and the cold junction temperature and performs all required calculations to report the thermocouple temperature in °C or °F. It combines high accuracy with the simple operation composed of five states: Start-Up, Channel Assignment, Initiate Conversion, Conversion, and Read Results. It works with ground-referenced sensors without the need for amplifiers, negative supplies, or level shift circuitry where signals are simultaneously digitized with three, high accuracy, 24-bit Δ-Σ ADCs using an internal 15ppm/°C reference.

    temp probe click inneri new

    Thermocouples can measure temperatures from –265°C to more than 1.800°C, generating a voltage as a function of the temperature difference between the tip (thermocouple temperature) and the electrical connection on the circuit board (cold junction temperature). In order to determine the thermocouple temperature, an accurate measurement of the cold junction temperature is required, known as cold junction compensation. The LTC2986 preforms automatic thermocouple cold junction compensation using any type of external sensor.

    The onboard PCC-SMP connector is a perfect solution for bringing thermocouple probes to the PCB, suitable for all K-type probes. To use Temp Probe Click user needs to connect the appropriate K-type thermocouple probe, which is not included in the package, into the PCC-SMP connector. Type-K thermocouple with glass braid insulation, available in our store, is used for precision measurements of high temperatures allowing this Click board™ to measure temperature up to 480°C (900°F).

    Temp Probe Click communicates with MCU using the SPI serial interface with a maximum SPI frequency of 2 MHz. The interrupt pin routed on the INT pin of the mikroBUS™ socket is utilized by LTC2986 to signal when the device is busy either during Start-Up or while a conversion cycle is in progress. Alongside this feature, this Click board™ also has a Reset function routed on the RST pin of the mikroBUS™ socket that will put the LTC2986 into the reset state by driving the RST pin LOW. Once this pin is returned HIGH, the device initiates its Start-Up sequence.

    This Click board™ is designed to operate with both 3.3V and 5V logic voltage levels selected via the VCC SEL jumper. It allows for both 3.3V and 5V capable MCUs to use the SPI communication lines properly. However, the Click board™ comes equipped with a library that contains easy to use functions and an example code which can be used, as a reference, for further development

  • Type Temperature & humidity
    Applications Can be used for temperature-monitoring applications such as direct thermocouple measurements.
    On-board modules Temp Probe Click is based on the LTC2986, a high accuracy thermocouple temperature monitoring system with 0.1°C accuracy and 0.001°C resolution from Analog Devices.
    Key Features High accuracy, directly digitizes, automatic thermocouple cold junction compensation, short-circuit and fault detection, and more.
    Interface SPI
    Compatibility mikroBUS
    Click board size L (57.15 x 25.4 mm)
    Input Voltage 3.3V or 5V

문서

연관제품

상품 상세 정보
상품명 써모커플 앰프 -LTC2986, Thermocouple (TEMP PROBE CLICK)
판매가(VAT별도) 127,530원
상품코드 P000BAHS
수량 수량증가수량감소
상품요약정보 써모커플 앰프 -LTC2986 입니다.

결제 안내

결제는 신용카드, 실시간 계좌이체, 무통장 입금 등을 선택하여 진행하실 수 있습니다. 세금계산서 발행을 요청하실 경우에는 결제방법을 무통장 입금으로 선택하시고 사업자등록증 사본을 cs@vctec.co.kr으로 보내주셔야 합니다.

배송 안내

  • 배송 방법 : 택배
  • 배송 지역 : 전국지역
  • 배송 비용 : 3,500원
  • 배송 기간 : 1일 ~ 10일
  • 배송 안내 : - 산간벽지나 도서지방은 별도의 추가금액을 지불하실 수 있습니다.
    - 상품종류에 따라서 상품의 배송이 다소 지연될 수 있습니다.
    - 구매 총액이 10만원 미만의 주문 경우는 택배발송시에는 배송비 3,500원이 추가됩니다.
    - 구매 총액 10만원 미만 주문의 퀵발송 및 급행처리 요청시 핸들링 비용 3,500원이 추가 됩니다.
    - 매장이 아니므로 방문구매 및 수령이 불가능 합니다.
    - 영업일 기준 2일 이내 미출고 물품은 해외 수입 제품입니다.
    - 높은 전압과 전류를 사용하는 제품은 사용 전 안전에 유의 바랍니다.
    - 제품을 교육수준으로 설명하거나 사용자 프로젝트에 대한 컨설팅이나 기술지원을 하지 않사오니 참고부탁 드립니다.

교환/반품 안내

교환 및 반품안내
- 상품을 공급 받으신 날로부터 7일이내에 교환 및 반품이 가능하며,
- 미개봉/미설치 제품인 경우이거나 불량제품인 경우에 한해 가능합니다.

- 교환/반품시 승인 없이 제품을 먼저 발송시 왕복 택배비가 발생합니다.
- 상품가치가 훼손되어 재판매가 불가능 할 경우는 교환/반품이  불가능합니다.
- 소프트웨어는 개봉시 교환/반품이 불가능합니다.

- 주문수입제품의 경우는 환불/교환이 불가능합니다.

- 수입제품의 경우는 수리가 불가능합니다.
- 배송지연안내를 받으신 경우는 주문 수입되는 경우이며, 주문 수입 제품의 경우 환불/교환이 불가능합니다.

- 고객변심에 의한 교환 및 반품 시 왕복 배송비는 고객님께서 부담하셔야 합니다.
- 제품구성품 및 스펙은 제조사 사정에 의해 예고없이 변경 될수도 있습니다.

환불 안내

환불시 반품 확인여부를 확인한 후 7영업일 이내에 결제 금액을 환불해 드립니다.
신용카드로 결제하신 경우는 신용카드 승인을 취소하여 결제 대금이 청구되지 않게 합니다.
(단, 신용카드 결제일자에 맞추어 대금이 청구 될수 있으면 이경우 익월 신용카드 대금청구시 카드사에서 환급처리됩니다.)

서비스문의 안내

상품사용후기

상품후기쓰기 모두보기

게시물이 없습니다

상품 Q&A

상품문의하기 모두보기

게시물이 없습니다

판매자 정보